Setting up a XI52 Datapower appliance

Configure the Datapower appliance

when COM port connected we will connected to Datapower appliance and first time it will ask us password.By default password is admin, later we can change to our own password.

login: admin
password: admin

Enter Disaster Recovery mode [yes/no]: no
Enter Common Criteria Compatibility mode? [yes/no]: no
Please enter new password: provide-password
Do you want to run the Install Wizard? [y:n]: y

Step 1 – Do you want to configure network interfaces? [y]: y
Do you have this information? [y]: y
Do you want to configure the eth0 interface? [y]: y
Do you want to enable DHCP? [y]: n
Enter the IP address  for interface in CIDR notation: 192.168.11.19/24
Note:
whichever is appropriate for your network, check ip address for your machine]
for home network /24 would be ideal network address.
Enter the IP Address for default IPv4 gateway []: 192.168.11.19
Note: Provide same address as earlier.

Enter n for question to configure eth1, eth2 and eh3 interfaces.

Step 2:
Do you want to configure network services? [y]: y
Do you want to configure DNS? [y]: n

Step 3:
Do you want to define unique system identifier for the appliance? [y] :
Note: Give any appropriate unique system identifier

Step 4:
Do you want to configure remote management access? [y]: y

These configuration require the IP address of the local interface that manage the appliance.

Do you have this information? [y]: y
Do you want to enable SSH? [y]: y
Enter the local IP address [0 for all] : 192.168.11.19
Note: Provide same IP as provided earlier.

Enter the port number [22]:
Note: Just enter to accept default

Do you want to enable WebGUI access [y]: y

Enter the local IP address [0 for all] : 192.168.11.19
Note: Provide same IP as provided earlier.

Enter the port number [9090]:
Note: Just enter to accept default

Step 5: Do you want to configure a user account that can reset passwords [y]: y
Note: This is optional, but you can provide userid and password ( keep note of this detail)

Step 6: Do you want to configure the hard disk array? [y]: y

Do you want to continue? [y]:

Enter name for the file system [ondisk]: dparray
Note: Provide any appropriate name

Step 7 – Do you want to review the current configuration? [y]:

Do you want to save current configuration? [y]: y
Overwrite previously saved configuration? [y/n]: y

DataPower Domain Creation

1) Login into DataPower console 

2) Search for Application Domain and Click on the highlighted Object

3) Click on Add button 

5) Provide the required information as per the below screenshot.

6) Click on Apply and Save Config